forum.citroen-ac4.fr

What do I use to prevent oil leaking from the rear seal?

wow your crank really looks good.
well the oil leakkage seems to be at this point very common. As you see the ridge on the crank has to drop in alloy gap. Most oil is comming out because of the oilpressure built up between bearing and tap. This sprays oil with force to the alloy 2 piece end cap (as told to me).
Probably you can use a modern rubberseal. Unfortunatly you have to cut it in two pieces and gleu them togheter. I will post your question also on the Dutch patan website. I'm struggeling with your problem to...

hopefully to be continued
Martijn

Bonsoir

Notre ami australien demande comment remedier aux fuites sur le palier.

Martijn se pose aussi la même question

Qui a une solution?

I put in french your questions most members of the forum are not quite fluent in english

Merci mfc

Mon francais techniqeu est tres mal, mais L'anglais très bien.
Et oui j'ai le meme probleme avec d'huile fuites sur le palier. Il ya un solution moderne???

Bonjour

Je crois que ces fuites font partie de la conception de nos voitures il suffit que tout soit propre et que les retours d'huile fonctionnent.


pour le reste un plateau sous la voiture garde le garage propre

I believe these leaks to be part of the car we only need the parts to be clean to enable the oil returns to work.

after all a kitchen tray under the car keeps the garage clean!

Bonsoir,

J'ai entendu parlé :scratch: d' un alésage puis un roulement a bille, (a h oui mais est ce qu'on parl ede la pompe a eau la :boulet: ?) et plus aucun soucis apres...

I dont know if you talk about the water pomp, but if it s the pomp, i heard about ball bearing to replace the piece......


-->http://www.e-jesco.jp/dico_fr.html

Sam